Ice Maker Repair in Downtown San Diego

Today ice makers are widespread. Like any other appliance, this device can malfunction. For ice maker repairs, the best solution is to call a technician from the Home Appliance Service Center. We provide quality Ice Maker Repair in Downtown San Diego, CA. The appliance is used extensively in the meat processing industry, in the manufacture of a variety of convenience foods. 

Cafes, restaurants and bars actively use the device in hot weather. Many consumers prefer to use a household ice machine in the summer period.

Our company has been working in the market for repairing household appliances since 2001. Our staff includes specialists with experience of over 20 years. We will list the following list of faults, which is exactly the assortment of faults with which. 

Based on our extensive experience, users and consumers most often turn to service centers when ice machines break down. If you see similar malfunctions in your appliances, don't hesitate to order Downtown San Diego Ice Maker Repair.

No water flows

This occurs when the pump is malfunctioning, or the nozzles are clogged. You can tell by the incomplete filling of the molds or the wrong shape of ice. The pump performs the function of forcing the liquid into the compartment. It then passes through the nozzles. When the water does not come, it indicates a clog. 

It must necessarily be removed. To do this, the water manifold is dismantled, the nozzles and filter are cleaned. The pump is also checked. Broken parts are to be replaced. Sounds simple, but it takes the expertise of an Ice Maker Repair in Downtown San Diego, CA technician.

Clogged sewer/drainage hose

The principle of functioning and connection of the hose for drainage in the unit is almost similar to the washing machine. However, clogging occurs much more often. And you can notice unfrozen cubes and liquid in the chamber. The cause of clogging is the ingress of foreign particles in the drain, the cooling of food and drinks in the unit, illiterate connection of the hose (below the required level). A Downtown San Diego Ice Maker Repairs technician will have no difficulty identifying the exact cause of the fault and the steps to be taken to remedy it.

Breaking the switch and thermostat

If the unit does not turn on, or if it shuts off, there may be a defect in the hopper thermostat. In addition, ice is not being made or the pressure switch will trip. It is the hopper thermostat that controls the ice production. When the desired temperature is reached, the unit will shut down. 

In case of malfunction the regulators are inspected, the opening/closing of the shut-off valve is checked, the condenser, fan and solenoid valve are examined. Our masters specializing in Ice Maker Repair in Downtown San Diego, CA will replace it in the shortest possible time.

Too Long Ice Maker

If the cycle time is longer than 30 minutes and there are irregularly shaped ice cubes, you can speak of a clogged radiator. This applies to air-cooled ice makers. It is necessary to clean the radiator urgently. To do this, remove the service hatch, unscrew the screws, unfasten the panel mounts, and remove it. The radiator is cleaned with a brush and air stream. Then the panel is reinstalled. Downtown San Diego Ice Maker Repair will gladly provide you with a variety of services.

Thermostat, valve, and programmer failures

If it is noticed that pieces of ice are freezing on the evaporator or the defrost cycle does not start, the unit must be immediately turned off and reset.

Evaporator problems

There can be two possibilities here - bad frosting or no frosting of the evaporator. In the first case, the pressure is less than the normal value. This is due to a clogged capillary or freon leakage. You must find and remove clogging, check the condition of the dehumidifying filter. It is necessary to find the leak and refill the freon. 

In the second case pressure is higher than normal in the suction process. Probably the solenoid valve or water valve is open. It is necessary to check and if necessary, replace the parts. We have experts at Ice Maker Repair in Downtown San Diego, CA and they will replace the evaporator in your ice maker very quickly.

Blinking lights

If this happens, it means that there is some kind of malfunction. You need to check the amount of liquid in the tank, ice mold filling. In order to avoid such problems, you should fill only with purified water. If you fill automatically, use a purified filter. Water in the tank changes every day. The tank is cleaned with a soda solution. If the flashing does not stop, you need to call a master.

Ice maker - a complex device, so the problems can arise in a variety of ways: from blinking lights and to replacing the compressor motor. Some problems you can diagnose on your own, but in other cases you need expert help from an experienced Home Appliance Service Center. Downtown San Diego Ice Maker Repair and Service technicians will come to your home the first time you call. By saving today on a quality diagnosis, you risk losing money that you'll have to spend tomorrow on a new ice maker.