Ice Maker Repair in Julian

Ice makers are heat exchange units for making food and technical ice. Untimely maintenance, improper operation can provoke various breakdowns. Repairing complex equipment by your own efforts rarely leads to positive results, so we recommend that you immediately contact the professionals of the company Home Appliance Service Center. Our staff is made up of top-notch professionals who perform quality Ice Maker Repair in Julian, CA.

The main causes of ice maker failures

No water inlet

This happens when the pump is faulty, or the nozzles are clogged. You can understand it by incomplete filling of the molds or incorrectly shaped ice. The pump performs the function of forcing the liquid into the compartment. It then passes through the nozzles. When the water does not come, it indicates a clog. It must necessarily be removed. To do this, the water manifold is dismantled, the nozzles and filter are cleaned. The pump is also checked. Broken parts are to be replaced. A Julian Ice Maker Repair technician can determine and repair such a breakdown.

Clogged sewer/drainage hose

The principle of functioning and connection of the hose for drainage in the unit is almost similar to the washing machine. However, clogging occurs much more often. And you can notice unfrozen cubes and liquid in the chamber. The cause of clogging is the ingress of foreign particles in the drain, the cooling of food and drinks in the unit, illiterate connection of the hose (below the required level). The Ice Maker Repair in Julian, CA wizard will have no trouble figuring out what the cause is.

Breaking the switch and thermostat

If the unit does not turn on, or if it shuts off, there may be a defect in the hopper thermostat. In addition, ice is not being made or the pressure switch will trip. It is the hopper thermostat that controls the ice production. When the desired temperature is reached, the unit will shut down. In case of malfunction the regulators are inspected, the opening/closing of the shut-off valve is checked, the condenser, fan and solenoid valve are examined. Our masters specializing in Julian Ice Maker Repairs will replace it in the shortest possible time.

Too Long Ice Maker

If the cycle time is longer than 30 minutes and there are irregularly shaped ice cubes, you can speak of a clogged radiator. This applies to air-cooled generators. It is necessary to clean the radiator urgently. To do this, remove the service hatch, unscrew the screws, unfasten the panel mounts and remove it. The radiator is cleaned with a brush and air stream. Then the panel is reinstalled. A technician who specializes in Ice Maker Repair in Julian, CA can determine the cause and repair the problem.

Thermostat, valve and programmer failures

If it is noticed that pieces of ice are freezing on the evaporator or the defrost cycle does not start, the unit must be immediately turned off and reset.

Evaporator problems

There can be two possibilities here - bad frosting or no frosting of the evaporator.

• In the first case, the pressure is less than the normal value. This is due to a clogged capillary or freon leakage. You must find and remove clogging, check the condition of the dehumidifying filter. It is necessary to find the leak and refill the freon. 
• In the second case pressure is higher than normal in the suction process. Probably the solenoid valve or water valve is open. It is necessary to check and if necessary, replace the parts. We have experts at Julian Ice Maker Repair, and they will replace the evaporator in your ice maker very quickly.

Blinking lights

If this happens, it means that there is some kind of malfunction. You need to check the amount of liquid in the tank, ice mold filling. In order to avoid such problems, you should fill only with purified water. If you fill automatically, use a purified filter. Water in the tank changes every day. The tank is cleaned with a soda solution. The only way out here is to call Ice Maker Repair in Julian, CA.

Contact the Home Appliance Service Center immediately if there is any problem.  Only there will help you determine the exact cause of the problem and make the proper repairs. As an independent intervention can completely disable the unit. You can rest assured that after our Julian Ice Maker Repair and Service your appliance will work for as long as possible without even the tiniest breakdown.