Ice Maker Repair in North Park

Ice makers are professional cooling equipment designed for the automatic production of food ice. Common applications include bars, restaurants, and catering facilities for making cocktails, drinks, and for cooling a variety of foods. This equipment can break down. Ice maker repair should definitely start with finding out the causes. That's why we recommend you contact the experts at Home Appliance Service Center right away. Repairing complex equipment with your own efforts rarely leads to a positive result. We provide quality Ice Maker Repair North Park, CA.

Consider typical breakdowns

A clogged drain hose or drain. The principle of how the drain hose in an ice maker is connected and works is similar to a washing machine, but clogs occur much more often. At the same time, you may notice water and non-freezing cubes inside the chamber.

Problems with the programmer, valve and thermostat. If ice is ice maker in chunks on the evaporator. Defrost cycle does not start. First thing to do is to turn off and reset the unit. After that find out what is causing the problem (programmer, evaporator thermostat, solenoid valve) and make North Park Ice Maker Repair.

Nozzles clogging or pump malfunction (no water coming out). Typical signs of malfunctioning are incorrectly shaped ice or incomplete filling of the molds. The pump is used to force water into the compartment, which comes through the nozzles. If the water is not coming, it means that there is a blockage, which must be removed.

Opaque cubes are produced. This happens when using hard water, which contains a lot of lime and calcium. If your area has a large number of impurities, be sure to install a purification filter. Contact an Ice Maker Repair North Park, CA technician for a more accurate diagnosis.

Faulty thermostat or switch. If the ice maker does not turn on or shuts off after fifteen minutes of operation, the hopper thermostat is probably defective. No ice maker will be produced, or the pressure switch will trip in an emergency mode. The hopper thermostat is used to control ice production. As soon as the temperature in the chamber reaches a certain point, the unit is disconnected from the mains.

The ice maker does not frost the evaporator. Pressure is higher than normal during suction. Water or solenoid valves may be open. Check and replace elements.

Evaporator is not freezing properly. Probably the pressure is lower than the norm. This happens as a result of capillary blockage or refrigerant leakage. The blockage must be found and repaired, and the condition of the filter-drier must be checked. Eliminate the leak and refill the system with coolant. North Park Ice Maker Repairs specialists will perform the service.

Ice takes longer than usual to produce the ice. If the cycle lasts longer than half an hour, half of the cubes are irregularly shaped, then the radiator is clogged (relevant for air-cooled generators). The radiator needs to be cleaned.

No water in the chamber, no ice. Even if cubes are formed, they are not the right shape. Water is not enough for complete filling of the molds. In this case, your machine is waiting for a breakdown and then you can't do without a Ice Maker Repair North Park, CA technician.

Unstable operation of the pump. Water flows into the chamber intermittently and unstably. Manifolds, filters and nozzles need to be cleaned. Diagnose pump malfunction, install a new part if necessary.

Excessive water in the chamber. The ice mold may not close from too many cubes. This indicates a malfunction in the thermostat which controls the amount of ice in the compartment. Install the faulty part and run a test check.

Water under the cabinet. A leak has occurred in the solenoid valve. The leak must be repaired, or the part must be replaced. Call a North Park Ice Maker Repair technician and he will fix it.

The body is shaking. If the ice maker shocks when touched, the connection has been made without grounding. Install a grounded, moisture-proof outlet and check the power cord and extension cord. If this causes you difficulty, contact an Ice Maker Repair North Park, CA professional.

Noisy machine operation. When you hear noise and whistling while the alternator is running, the condenser micromotor is probably worn out. It is not recommended to lubricate and repair it, it is better to replace it immediately.

If you have a broken ice maker, contact Home Appliance Service Center, whose experts can perform quality North Park Ice Maker Repair and Service as soon as possible. You can also order a permanent ice maker service from us, after which we will check your equipment monthly and do the repairs that are included in the cost of this service, if needed