Washing Machine Repair in Fallbrook

A washing machine is an electrical device designed to wash clothes and laundry. Modern washing machines are no longer completely similar to the first examples of such devices, and are not a luxury as it was before. Now this electric assistant for the housewife is a matter of prime necessity. And it will be very unpleasant if this miracle device breaks. Therefore, in such cases, we advise you to contact the Home Appliance Service Center. And call a Washing Machine Repair in Fallbrook, CA. We have over 20 years of experience with a wide variety of washing machine breakdowns.

The staff of this company consists exclusively of highly qualified professionals who can fix any breakdown and provide you with any type of Fallbrook Washing Machine Repair. Contact us as soon as you notice something wrong with your nice device. Because the sooner you contact us for help, the sooner you can use your washing machine again and enjoy clean and odorous clothes.

Main types of washing machine malfunctions and their causes

Drain pump does not work

If the washing machine stops draining, it means that the motor has failed. Alternatively, a foreign object like a pin, coin or button has blocked the pump or even damaged the impeller. To restore the unit's performance, you need to remove the foreign object and/or replace the failed elements. Call a Washing Machine Repair in Fallbrook, CA - they will find the cause, tighten whatever is loose and replace the failed parts. 

The control unit is defective

If the malfunction of the washing machine is due to a failure of the electronic controller, it can be determined by the failure of the program, blinking lights. Alternatively, the program may not start at all. Damage to the "brain" of the machine is most often the result of moisture or a voltage spike in the network, which causes the burnout of electronic components such as a relay or capacitor. The damaged element will have to be replaced. If the processor is damaged, the controller will have to be replaced completely. A Fallbrook Washing Machine Repairs technician will promptly deal with this breakdown.

The drum does not rotate

If the drum starts to jerk, rotates slowly, or does not rotate at all, it is due to wear of the brushes in the motor of the machine - they will have to be replaced. If the motor works without excessive noise, but the drum does not rotate, it indicates a problem with the drive belt. It can stretch or simply come off the pulley. In any case, professional help to the machine is necessary. 

By the way, if the drive belt regularly comes off, it is worth checking the bearings, most likely they are worn out. Alternatively, the cause of the malfunction of the washing machine can be in the motor itself. In this case, a replacement of the motor or even a Washing Machine Repair in Fallbrook, CA is required as a whole.

The water does not heat up

This malfunction of the washing machine is caused by a breakdown of the electric tube heater. Scale from hard water, lint from clothes and detergent residues settle on the anvil element, forming an insulating "jacket", which causes overheating - the electric tube heater burns out. You can extend the life of this element by periodic cleaning of the heater, but if it burns out, its replacement is inevitable. Sounds simple, but it takes the expertise of a Fallbrook Washing Machine Repair technician.

Noise during washing and spinning

If the appliance begins to rattle at high speeds, and then also during the washing, it is due to the wear of the bearings. At a certain stage of destruction, the drum may not rotate at all - it is not worth it.  In this case, you need a professional Washing Machine Repair in Fallbrook, CA.

Remember, no matter what the breakdown is, you have the option of calling the Home Appliance Service Center. Our technicians perform Fallbrook Washing Machine Repair and Service of any complexity, repairing and replacing broken parts. You can call us or leave a completed form on our website, and we'll contact you very quickly!