619-928-5000 
Request Service 
The truth is that your Samsung fridge is arguably amongst the hardest working kitchen appliances. It is one of those things in the kitchen that we use on a daily basis for one of the most important things at home – to keep our food in proper condition. A failing Samsung fridge could actually cause a significant amount of trouble and you most definitely need to avoid situations of the kind.
There are quite a few things which could go wrong with your Samsung fridge – you should know that. What is more, if you have a freezer, this is one additional appliance to worry about. In any case, usually when something happens to your fridge it’s most likely to have an impact on the freezer and vice versa. One of the most common issues is when your fridge overheats. Here are a few possible causes for this.
Cold control or the temperature control
This is a temperature controlled switch which is designated to supply power to your compressor as well as to the fan circuits in the Samsung fridge. If the compressor as well as the fans are running regularly but aren’t running often enough or not long enough in order to maintain the proper temperature in the sections of the freezer and for the fresh food, the cold control might actually be defective. It might also be de-calibrated and it might need a helping hand. Normal temperature should be around 38 degrees (F).
Evaporator Fan Motor
The evaporator fan motor is an integral component which has its location in the freezer compartment. It’s usually right behind the evaporator cover and it is designated to properly circulate the cold air throughout the entire appliance as long as the compressor is running. As you can figure out on your own, if this device malfunctions, the flow of cold air is going to be interrupted and hence the Samsung fridge could easily get too warm.
Electronic control board
Some of the more contemporary units have an electronic control board. This board is connected with thermistors or different temperature sensors which are used in order to monitor the temperature in the freezer and the fresh food compartment. This information is then used by the control board in order for it to send the right signals to the compressor as well as the defrost system and the fan motors. If the temperature is too high, you might have issues with your electronic board.
Now, even though there are a lot of different DIY tips on the internet, it’s important to understand that these are repair works which shouldn’t be carried out on your own. You need to ensure that everything is handled by a professional appliance repair specialist, if you want splendid results. It is important to work with a company that has been in business for multiple years and understands all aspects of repairs.
Contact us: